2144.04 Legal Precedent as Source of Supporting Rationale [R-07.2022]

As discussed in MPEP § 2144, an examiner may utilize legal precedent as a source of supporting rationale when warranted and appropriately supported. In formulating any rejection invoking legal precedent, the examiner must take care to ensure that the rationale is explained and shown to apply to the facts at hand. Examples directed to various common practices which the court has held normally require only ordinary skill in the art and hence are considered routine expedients are discussed below. If the applicant has demonstrated the criticality of a specific limitation, it would not be appropriate to rely solely on case law as the rationale to support an obviousness rejection.

I. AESTHETIC DESIGN CHANGES

In re Seid, 161 F.2d 229, 73 USPQ 431 (CCPA 1947) (Claim was directed to an advertising display device comprising a bottle and a hollow member in the shape of a human figure from the waist up which was adapted to fit over and cover the neck of the bottle, wherein the hollow member and the bottle together give the impression of a human body. Appellant argued that certain limitations in the upper part of the body, including the arrangement of the arms, were not taught by the prior art. The court found that matters relating to ornamentation only which have no mechanical function cannot be relied upon to patentably distinguish the claimed invention from the prior art.). But see Ex parte Hilton, 148 USPQ 356 (Bd. App. 1965) (Claims were directed to fried potato chips with a specified moisture and fat content, whereas the prior art was directed to french fries having a higher moisture content. While recognizing that in some cases the particular shape of a product is of no patentable significance, the Board held in this case the shape (chips) is important because it results in a product which is distinct from the reference product (french fries).).

II. ELIMINATION OF A STEP OR AN ELEMENT AND ITS FUNCTIONA.Omission of an Element and Its Function Is Obvious if the Function of the Element Is Not Desired

Ex parte Wu, 10 USPQ 2031 (Bd. Pat. App. & Inter. 1989) (Claims at issue were directed to a method for inhibiting corrosion on metal surfaces using a composition consisting of epoxy resin, petroleum sulfonate, and hydrocarbon diluent. The claims were rejected over a primary reference which disclosed an anticorrosion composition of epoxy resin, hydrocarbon diluent, and polybasic acid salts wherein said salts were taught to be beneficial when employed in a freshwater environment, in view of secondary references which clearly suggested the addition of petroleum sulfonate to corrosion inhibiting compositions. The Board affirmed the rejection, holding that it would have been obvious to omit the polybasic acid salts of the primary reference where the function attributed to such salt is not desired or required, such as in compositions for providing corrosion resistance in environments which do not encounter fresh water.). See also In reLarson, 340 F.2d 965, 144 USPQ 347 (CCPA 1965) (Omission of additional framework and axle which served to increase the cargo carrying capacity of prior art mobile fluid carrying unit would have been obvious if this feature was not desired.); and In re Kuhle, 526 F.2d 553, 188 USPQ 7 (CCPA 1975) (deleting a prior art switch member and thereby eliminating its function was an obvious expedient).

B.Omission of an Element with Retention of the Element’s Function Is an Indicium of Nonobviousness

Note that the omission of an element and retention of its function is an indicium of nonobviousness. In reEdge, 359 F.2d 896, 149 USPQ 556 (CCPA 1966) (Claims at issue were directed to a printed sheet having a thin layer of erasable metal bonded directly to the sheet wherein said thin layer obscured the original print until removal by erasure. The prior art disclosed a similar printed sheet which further comprised an intermediate transparent and erasure-proof protecting layer which prevented erasure of the printing when the top layer was erased. The claims were found nonobvious over the prior art because although the transparent layer of the prior art was eliminated, the function of the transparent layer was retained since appellant’s metal layer could be erased without erasing the printed indicia.).

III. AUTOMATING A MANUAL ACTIVITY

In reVenner, 262 F.2d 91, 95, 120 USPQ 193, 194 (CCPA 1958) (Appellant argued that claims to a permanent mold casting apparatus for molding trunk pistons were allowable over the prior art because the claimed invention combined “old permanent-mold structures together with a timer and solenoid which automatically actuates the known pressure valve system to release the inner core after a predetermined time has elapsed.” The court held that broadly providing an automatic or mechanical means to replace a manual activity which accomplished the same result is not sufficient to distinguish over the prior art.).

IV. CHANGES IN SIZE, SHAPE, OR SEQUENCE OF ADDING INGREDIENTS

A.Changes in Size/Proportion

In re Rose, 220 F.2d 459, 105 USPQ 237 (CCPA 1955) (Claims directed to a lumber package “of appreciable size and weight requiring handling by a lift truck” were held unpatentable over prior art lumber packages which could be lifted by hand because limitations relating to the size of the package were not sufficient to patentably distinguish over the prior art.); In re Rinehart, 531 F.2d 1048, 189 USPQ 143 (CCPA 1976) (“mere scaling up of a prior art process capable of being scaled up, if such were the case, would not establish patentability in a claim to an old process so scaled.” 531 F.2d at 1053, 189 USPQ at 148.).

In Gardnerv.TEC Syst., Inc., 725 F.2d 1338, 220 USPQ 777 (Fed. Cir. 1984), cert. denied, 469 U.S. 830, 225 USPQ 232 (1984), the Federal Circuit held that, where the only difference between the prior art and the claims was a recitation of relative dimensions of the claimed device and a device having the claimed relative dimensions would not perform differently than the prior art device, the claimed device was not patentably distinct from the prior art device.

B.Changes in Shape

In reDailey, 357 F.2d 669, 149 USPQ 47 (CCPA 1966) (The court held that the configuration of the claimed disposable plastic nursing container was a matter of choice which a person of ordinary skill in the art would have found obvious absent persuasive evidence that the particular configuration of the claimed container was significant.).

C.Changes in Sequence of Adding Ingredients

Ex parte Rubin, 128 USPQ 440 (Bd. App. 1959) (Prior art reference disclosing a process of making a laminated sheet wherein a base sheet is first coated with a metallic film and thereafter impregnated with a thermosetting material was held to render prima facie obvious claims directed to a process of making a laminated sheet by reversing the order of the prior art process steps.). See also In reBurhans, 154 F.2d 690, 69 USPQ 330 (CCPA 1946) (selection of any order of performing process steps is prima facie obvious in the absence of new or unexpected results); In reGibson, 39 F.2d 975, 5 USPQ 230 (CCPA 1930) (Selection of any order of mixing ingredients is prima facie obvious.).

V. MAKING PORTABLE, INTEGRAL, SEPARABLE, ADJUSTABLE, OR CONTINUOUS

A.Making Portable

In reLindberg, 194 F.2d 732, 93 USPQ 23 (CCPA 1952) (Fact that a claimed device is portable or movable is not sufficient by itself to patentably distinguish over an otherwise old device unless there are new or unexpected results.).

B.Making Integral

In reLarson, 340 F.2d 965, 968, 144 USPQ 347, 349 (CCPA 1965) (A claim to a fluid transporting vehicle was rejected as obvious over a prior art reference which differed from the prior art in claiming a brake drum integral with a clamping means, whereas the brake disc and clamp of the prior art comprise several parts rigidly secured together as a single unit. The court affirmed the rejection holding, among other reasons, “that the use of a one piece construction instead of the structure disclosed in [the prior art] would be merely a matter of obvious engineering choice.”); but see Schenckv.Nortron Corp., 713 F.2d 782, 218 USPQ 698 (Fed. Cir. 1983) (Claims were directed to a vibratory testing machine (a hard-bearing wheel balancer) comprising a holding structure, a base structure, and a supporting means which form “a single integral and gaplessly continuous piece.” Nortron argued that the invention is just making integral what had been made in four bolted pieces. The court found this argument unpersuasive and held that the claims were patentable because the prior art perceived a need for mechanisms to dampen resonance, whereas the inventor eliminated the need for dampening via the one-piece gapless support structure, showing insight that was contrary to the understandings and expectations of the art.).

C.Making Separable

In reDulberg, 289 F.2d 522, 523, 129 USPQ 348, 349 (CCPA 1961) (The claimed structure, a lipstick holder with a removable cap, was fully met by the prior art except that in the prior art the cap is “press fitted” and therefore not manually removable. The court held that “if it were considered desirable for any reason to obtain access to the end of [the prior art’s] holder to which the cap is applied, it would be obvious to make the cap removable for that purpose.”).

D.Making Adjustable

In re Stevens, 212 F.2d 197, 101 USPQ 284 (CCPA 1954) (Claims were directed to a handle for a fishing rod wherein the handle has a longitudinally adjustable finger hook, and the hand grip of the handle connects with the body portion by means of a universal joint. The court held that adjustability, where needed, is not a patentable advance, and because there was an art-recognized need for adjustment in a fishing rod, the substitution of a universal joint for the single pivot of the prior art would have been obvious.).

E.Making Continuous

In reDilnot, 319 F.2d 188, 138 USPQ 248 (CCPA 1963) (Claim directed to a method of producing a cementitious structure wherein a stable air foam is introduced into a slurry of cementitious material differed from the prior art only in requiring the addition of the foam to be continuous. The court held the claimed continuous operation would have been obvious in light of the batch process of the prior art.).

VI. REVERSAL, DUPLICATION, OR REARRANGEMENT OF PARTS

A.Reversal of Parts

In reGazda, 219 F.2d 449, 104 USPQ 400 (CCPA 1955) (Prior art disclosed a clock fixed to the stationary steering wheel column of an automobile while the gear for winding the clock moves with steering wheel; mere reversal of such movement, so the clock moves with wheel, was held to be an obvious modification.).

B.Duplication of Parts

In reHarza, 274 F.2d 669, 124 USPQ 378 (CCPA 1960) (Claims at issue were directed to a water-tight masonry structure wherein a water seal of flexible material fills the joints which form between adjacent pours of concrete. The claimed water seal has a “web” which lies in the joint, and a plurality of “ribs” projecting outwardly from each side of the web into one of the adjacent concrete slabs. The prior art disclosed a flexible water stop for preventing passage of water between masses of concrete in the shape of a plus sign (+). Although the reference did not disclose a plurality of ribs, the court held that mere duplication of parts has no patentable significance unless a new and unexpected result is produced.).

C.Rearrangement of Parts

In reJapikse, 181 F.2d 1019, 86 USPQ 70 (CCPA 1950) (Claims to a hydraulic power press which read on the prior art except with regard to the position of the starting switch were held unpatentable because shifting the position of the starting switch would not have modified the operation of the device.); In re Kuhle, 526 F.2d 553, 188 USPQ 7 (CCPA 1975) (the particular placement of a contact in a conductivity measuring device was held to be an obvious matter of design choice).

VII. PURIFYING AN OLD PRODUCT

Pure materials are novel vis-à-vis less pure or impure materials because there is a difference between pure and impure materials. Therefore, the issue is whether claims to a pure material are nonobvious over the prior art. In reBergstrom, 427 F.2d 1394, 166 USPQ 256 (CCPA 1970). Purer forms of known products may be patentable, but the mere purity of a product, by itself, does not render the product nonobvious.

Factors to be considered in determining whether a purified form of an old product is obvious over the prior art include whether the claimed chemical compound or composition has the same utility as closely related materials in the prior art, and whether the prior art suggests the particular form or structure of the claimed material or suitable methods of obtaining that form or structure. In reCofer, 354 F.2d 664, 148 USPQ 268 (CCPA 1966) (Claims to the free-flowing crystalline form of a compound were held nonobvious over references disclosing the viscous liquid form of the same compound because the prior art of record did not suggest the claimed compound in crystalline form or how to obtain such crystals.). However, in the case of product-by-process claims, if a first prior art process is improved to enhance the purity of the product produced by the process, and if the purified product has no structural or functional difference from the products produced by other prior art processes, then the improvement in the first process that improves the purity of the product does not give rise to patentability. See Purdue Pharma v. Epic Pharma, 811 F.3d 1345, 117 USPQ2d 1733 (Fed. Cir. 2016). See also MPEP § 2113.

See also Ex parteStern, 13 USPQ2d 1379 (Bd. Pat. App. & Inter. 1987) (Claims to interleukin-2 (a protein with a molecular weight of over 12,000) purified to homogeneity were held unpatentable over references which recognized the desirability of purifying interleukin-2 to homogeneity in a view of a reference which taught a method of purifying proteins having molecular weights in excess of 12,000 to homogeneity wherein the prior art method was similar to the method disclosed by appellant for purifying interleukin-2).